Is Meeting Wastewater Discharge Compliance and Cost Savings in the Food and Beverage Industry a win/win situation?
Here, David Gaskill, Business Development Manager (Industrial) at Siltbuster, the leading water treatment specialist, discusses meeting regulatory and environmental compliance requirements through proper wastewater management.
Continue Reading or Click Here to read the article
During the production of Food and Beverages, wastewater (effluent) is often created as a by-product of the process associated within the factory. Sometimes this is the direct result of the product, but often it is caused by the cleaning (CIP) of the equipment used within the production facility. This wastewater needs to leave the site in order for the factory to operate, and produce goods.
As the demand for water grows around the world it is now considered a major resource, so re-using water not only helps to reduce a companies reliance on their supply, but it also provides cost savings for the business. These savings come from the ‘bottom line’, meaning any savings made are increased profit for the company.
The wastewater generated can be disposed of either by tankering off site or by on site treatment, which can then be discharged to sewer or river. Tankering can be cost effective with small volumes of wastewater, but the factory is still reliant on the tankers for a safe and legal disposal route, enabling the factory to continue producing goods. Whereas, depending upon the requirements, wastewater can be treated for re-use in the factory. This often occurs in the vegetable industry where the wastewater is treated and then re-used for washing the vegetable, with the final rinse using potable water.
If there are sufficient volumes of wastewater these are often discharged to drain (sewer). In doing so, they must meet the Discharge Consent imposed by the local Water Companies. Not meeting the Discharge Consent could open the company for large fines. As well as the Discharge Consent, the local Water Companies also charges a fee based on the characteristics of the wastewater and the volume discharged which is known as the Mogden Formula. The Mogden Formula is the cost the UK Water Companies charge a business to dispose of the wastewater into the foul sewer.
There are several aspects to the Mogden Charge which creates the bill the business must pay. In order to reduce the Mogden Charge the following three variables can be altered, given in terms of the highest impact to the lowest:
- Flow – the lower the flow, the less the charge will be. So, have you looked at Water Management across the site and put the findings in place? Simple tips like putting stop guns on manual wash hoses not only reduce the cost of water coming into the factory but also reduce the cost of wastewater leaving the factory
- COD – COD is Chemical Oxygen Demand of the wastewater. This is the amount of oxygen required to reduce the organic content of the wastewater. For Mogden, the sample is usually left to settle for an hour before the supernatant is tested
- TSS – This is the total suspended solids within the wastewater
Assuming the site has implemented a Water Audit and is producing minimal wastewater, on site treatment plants can easily reduce the suspended solids and associated COD, therefore ensuring Discharge Compliance and cost savings. The figure below demonstrates a typical Wastewater Treatment Plant at a Food and Beverage site and the various stages where savings can be made:
In the example above, it is assumed that if the factory is already in compliance for discharge to sewer, meaning the Mogden Costs could be around £550,000 per annum. By installing a Balance Tank, Chemical Addition and Solids Reduction Stage (B), companies could save up to £375,000 per annum against untreated discharge to sewer. As more stages are added, such as reducing the COD and suspended solids further, the savings on the Mogden Charges also reduce in magnitude, making the payback for investing in these stages much longer. For discharge to river, all the above stages would be needed to ensure compliance.
Chemical Addition and Solids Reduction can easily be implemented in the form of Chemical Mix Tanks followed by either Settlement Tanks or Dissolved Air Flotation. These process stages reduce the suspended solids and the COD associated with these solids. This stage offers the biggest savings on the Mogden Charges and often enables consents to be met without further treatment. If further treatment stages are required for Consent Compliance, then additional savings under the Mogden Costs are achieved and the factory can continue producing their goods. This is a win/win.
Even if discharging under consent, reduction of the Mogden Charge will provide bottom line savings for the business. In the above example, approximately £375,000 savings per annum can be made which can be put towards the business case for the new treatment plant. Since the saving are ongoing, this reduces costs to the company. How much product needs to be sold to generate this amount of money to pay the bill, which can easily be saved through investment?
Installation of equipment for Balancing, Chemical Conditioning and Suspended Solids reduction of wastewater is a typical and standard approach within the Food and Beverage Industry. For Capital Plant, the project may take several months to complete but equipment can be hired in whilst the main plant is being build, providing instant Discharge Compliance and cost saving. Equipment from Siltbuster has been hired for this situation, as well as Biological Treatment stages if needed, depending upon discharge consent. The added advantage of hiring equipment is that once the hired equipment is installed then data can be used to optimise the design of the full-scale plant.
Hiring equipment for onsite wastewater treatment offers consent compliance, critical data for full scale plant design and also savings from the bottom line. It is a tried and tested solution being favoured by more and more companies. Siltbuster provides a wide range of solutions that can be hired to treat wastewater at food and drink sites. The organisation works closely with its clients to implement solutions in a quick and flexible way, meeting the demands of the industry.
